[China Glass Net] The main construction tools include: electric mixer, mixing drum, bucket, toothed spatula, level ruler, rubber hammer, cross rubber, rag and so on.

The substrate should be flat, basically dry, with sufficient strength, clean, no oil, floating dust, loose animals, etc. The flatness of the base is very important for the amount of material used. To ensure the flatness and verticality of the base surface, the amount of material can be guaranteed within the control range, and the surface of the tile is ensured to be flat, eliminating the need to adjust the flatness of each tile. For uneven substrates, it is advisable to use a suitable premixed mortar before leveling.

If the water absorption of the substrate is high, it is recommended to be fully moist but not clear.

Mix and bond the mortar. Use light-colored series of tile adhesives. For those with low alkali resistance, such as metal, it is recommended to use neutral-type products.

The mixed glue can observe the shiny feeling on the surface, and the stirring traces brought by the stirrer on the surface of the glue are not easy to heal.

A small grooved spatula was used to scrape the thickness of the substrate by 4 mm and combed into ribbed stripes.

Place the entire mosaic on the adhesive, compact it, and clean the gap in time.

If the color of the sealant is not the same as the color of the tile adhesive, a small amount of tile adhesive is squeezed out after the paving, so as to prepare a special caulking agent for later use.

After 24 hours of mosaic paste, you can start caulking. Due to the low water absorption of the general mosaic, it is generally recommended to use a two-component joint compound to increase the adhesion.

First clean the gap, mix the caulking agent, use a rubber scraper to evenly scrape the caulking agent into the gap at a 45-degree angle. After 15 minutes, use a wrung sponge to clean the caulking agent on the brick surface.

If you do not use a whole bag of caulking agent at a time, you should stir the whole package of dry powder evenly before adding water, and then take appropriate amount to stir, so as to avoid uneven distribution of pigment and fine admixture, affecting the final product effect.

For better cleaning results, use a sponge to clean twice. After about 2 hours, wipe the brick surface again with wrung sponge.

Be careful to wash the sponge frequently.

Since the substrate is too dry, the construction environment temperature is high and the wind is large, and the slurry filled in the gap loses water too quickly, which easily causes the surface of the joint filler to be powdered or cracked. In this case, attention should be paid to the maintenance and hydration work of the materials to ensure the hydration process of the joint filler.

Especially for the construction surface exposed to the sun, care must be taken to prevent the caulking agent from drying in the first 72 hours. The construction surface can be covered with spray or 2-3 times a day to achieve perfect results.

Glass mosaic construction process review:

Paste construction process: clean the base surface → elastic line positioning → stir mixing glue → squeegee glue → tile tiling → adjust the flatness of the flatness → install the cross position → clean the brick surface

Filling construction process: check the tile → clean the gap → mix the sealant → scrape the grout → initial cleaning → curing → clean again

Warmth Tips:

The color of the finished sealant will vary depending on the type of tile, the size of the surface void, the construction conditions and the construction techniques. Please carefully read the construction guide and step instructions before construction. Tile grouts contain a large amount of alkaline cement, which will irritate the skin. Avoid inhalation of dust and skin and eyes during construction. If you get into the eyes, rinse with plenty of water and seek medical advice. If the bag is not used up, please keep the bag mouth sealed to prevent the moisture from affecting the use and keep it out of reach of children.

woman's short

Slim Ladies Beach Pants,Woman Beach Short,Woman Swim Short,Womans Board Shorts

shaoxing junjia textile co.,ltd , https://www.junswim.com